- Joined
- Sep 4, 2014
- Messages
- 560
- Reaction score
- 435
Has anyone tryed them in a 1in20 twist barrel and if so what kind of results do you get.
280Bravo said:Has anyone tryed them in a 1in20 twist barrel and if so what kind of results do you get.
280Bravo said:what do you use to measure the inside diameter of the barrel.
right now I use the Barnes expander MZ 195 grain with the Brown Sabot and get really great results with 100 grains of triple seven.
Just wanted to see if conicals would do anygood good.
Thanks
Omega45 said:I use Eastern Maine wool wads. I snap a couple primers in the bore to get some fouling in there as the bullets are a shade loose in my bore. I dump powder, place a wad in bore then place bullet on top of wad and send them home together. No swabbing with BH209. Clean when your done shooting. I tried T7 a few weeks back w/o swabbing and groups were horrible probably due to the crud ring. That day I finally made up my mind to never shoot T7 again!!!!!!
52Bore said:Interesting about the fouling for gripping a loose bullet - Thanks
I witnessed a guy shooting BH209 thru a chronograph this summer, he and I were surprised how much variation over 100fps, once over 200fps he had when he did NOT clean between shots - probably 10 shots fired w/o cleaning. With cleaning he fired a couple rounds and it was around 25fps.
Anyone else tried this?
Enter your email address to join: