My Gibbs
- Thread starter Saltner
- Start date
Help Support Modern Muzzleloading Forum:
- Joined
- Aug 30, 2013
- Messages
- 54
- Reaction score
- 2
On February 15, the arms fair in Vicenza I met the owner of the company Davide Pedersoli and with great joy I was recognized for the results published on the Facebook page.
I chatted at length with Pierangelo Pedersoli and Balázs Németh owner of Capandball Firearms Store Budapest and they invited me to write a report on my experience with Gibbs.
You have already seen the results I got, but I still want to share this article published on the blog of Davide Pedersoli.
http://blog.davide-pedersoli.com/develo ... bbs-rifle/
Missing report with paper patch, i hope you publish this too.
It was nice to know these two important people.
I chatted at length with Pierangelo Pedersoli and Balázs Németh owner of Capandball Firearms Store Budapest and they invited me to write a report on my experience with Gibbs.
You have already seen the results I got, but I still want to share this article published on the blog of Davide Pedersoli.
http://blog.davide-pedersoli.com/develo ... bbs-rifle/
Missing report with paper patch, i hope you publish this too.
It was nice to know these two important people.
- Joined
- Jan 1, 2013
- Messages
- 1,982
- Reaction score
- 800
Excellent! congratulations :applause:
- Joined
- Aug 30, 2013
- Messages
- 54
- Reaction score
- 2
Some tests done because desperation in finding a compromise to shoot the PP that are somewhat mangy
6 shoots at 110 yards with the best damn flyer
Could be good but finished powder, however, from the previous not having lubricated the patch barrel is dirty more
An alternative to the use 1,5F 2F which has performed remarkably well
Note that although the particle size is different, there is practically no difference in speed
Decreasing the dose widens
Conclusion: I stubbornly use boots on 65-70 max 80 but I found that for PP it takes so GASSSSSSSSS
6 shoots at 110 yards with the best damn flyer
Could be good but finished powder, however, from the previous not having lubricated the patch barrel is dirty more
An alternative to the use 1,5F 2F which has performed remarkably well
Note that although the particle size is different, there is practically no difference in speed
Decreasing the dose widens
Conclusion: I stubbornly use boots on 65-70 max 80 but I found that for PP it takes so GASSSSSSSSS
Similar threads
