- Joined
- Dec 21, 2011
- Messages
- 65
- Reaction score
- 1
I took a peace of brake cable from a bike the 209 shot primer fit real good.i measured it and cut it to size.The treads on it were 6.1mm same as the #11 nipple. if i had a way to cap it to inclose the primer i would be tempted to try it,the fire channel is 7/64.i know the fire channels on the nipples are.030 to .034 which is really small,i asume the mag spark system is hardened a lot more then the brake cable.it looks good tho.I,ve decided when i do shoot it i will use 300 grain conicals.the powder not sure yet, takes 209 primers i here to ignite blackhorn 209.What is the easiest to ignite powder out there lose powder i should say i've only dealt with pellets in my cva which work fine but here a lot of stuff about developing good loads with lose powder.I WON'T SHOOT IT BUT LIKE TO TINKER WITH STUFF the MAG SPARK CONVERSON COST OVER $35.00 BUCKS SHIPPED,WILL PROABLY TRY MOSCUT CAPS FRIST