Hoppe's Bore Snake

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flatland hunter

Well-Known Member
*
Joined
Jun 19, 2005
Messages
484
Reaction score
0
I used this for the first time yesterday on three ML's... worked really well! Especially on those ML's I did not want to break completely down... MLII and the White Lightning. Normally when getting close to hunting season I want to leave the barrel and action on the stock which makes cleaning without gettin crud into the trigger area a challenge... it is not an issue with my White 98 and 91 because the plunger/hammer assembly just pulls right out and I have the room to cover/seal the trigger area with electrical tape. Can't do it with the MLII and the Lightning (but for different reasons)... in comes the Bore Snake!

Great product! They just don't tell you if you can use solvent on the snake... so I used my White/Windex cleaner, rinses right out!
 
The one I've got said it was ok to use solvent. It also said you could wash it, but I do that in the sink and hang it to dry. :wink:
 

Latest posts

Back
Top