T/C Omega/Encore firing pin dissasembly

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Admin

Well-Known Member
*
Joined
Aug 1, 2011
Messages
1,316
Reaction score
12
omega1.jpg


Reportedly the G2 is similar to the Omega in screw placement,

encore1.jpg


The Encore's screw is above the firing pin hole instead of below it.

omega2.jpg


The pieces. Be careful not to lose the spring.

omega5.jpg


Diagram of the parts and how they fit together.

omega3.jpg


The easy way to align the screw hole in the reciever and the firing pin housing.

Clean inside it and oil regularly.
 
omeganew1.jpg


Back of the action. The firing pin depresses when you use a screwdriver to turn the screw/retainer.

omeganew2.jpg


The back of the reciever without the screw retainer and firing pin/spring.

omeganew3.jpg


Screw/retainer, firing pin and spring.

omeganew4.jpg


The screw/retainer.

omeganew.jpg


Diagram of the parts.


Pictures and info courtesty of Tiderunner.

The Encore picture in the top post Courtesy of Loggy.
 
Back
Top