So i pulled the rod out of my gun for the first time and discovered this. I'm pretty sure i can get the broken bolt out of the rod. I'm wondering if the remaining broken piece is in my stock? if so how to get it out?
I agree need to know if this is a new to you rifle. If the rifle is new to you then the previous owner probably just put that end of the rod down the ramrod channel. Not that many attachments will go down the channel on the rod.
But if you think it might be down in the ramrod channel just take the barreled action out of the stock. The ramrod channel is open on top under the barrel.
ive yet to put the rod down the bbl. i pulled it out from where it lives in the stock . I dont know for certain that anything is stuck in there. Something broke off the end and it sits even with the muzzle so im GUESSING that whatever attachment was threaded on is now stuck down in there.
But if you think it might be down in the ramrod channel just take the barreled action out of the stock. The ramrod channel is open on top under the barrel.
I think its similar to the sharp end of the arrow. the brass is glued (?) into the aluminum .
the rod belongs to a knight Disc extreme
ill try the heating it up advice, little concern about ruining it now.