- Joined
- Mar 31, 2008
- Messages
- 3,500
- Reaction score
- 3
New Powerbelt Insert Mold in progress
Got the new drill press in, Found a screw that has a perfect straight thread cut on it so it will be round and not be lopsided on one end. I started out with the .45cal mold which will fit both the Copper series .45 and the Platinum series .45 Powerbelts.
I need to pick up some roll pins, angle iron, washers and some 1/4" bolts so i can put it all together and run some lead inserts before threading it. I want to make sure i drilled the holes deep enough.
http://thepowerbeltforum.powerguild.net ... 5.htm#3660
The .50cal series mold i will build next.
Got the new drill press in, Found a screw that has a perfect straight thread cut on it so it will be round and not be lopsided on one end. I started out with the .45cal mold which will fit both the Copper series .45 and the Platinum series .45 Powerbelts.
I need to pick up some roll pins, angle iron, washers and some 1/4" bolts so i can put it all together and run some lead inserts before threading it. I want to make sure i drilled the holes deep enough.
http://thepowerbeltforum.powerguild.net ... 5.htm#3660
The .50cal series mold i will build next.