45cal 300gr PowerBelt Plat

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GM54-120

Administrator
Staff member
ADMIN
Global Moderator
Supporting member
*
Joined
Dec 24, 2009
Messages
15,014
Reaction score
6,874
I tested just a few this weekend with a heavily fouled bore.

Using 100gr of BH209 and a Win209 primer in my Accura 45 these are VERY accurate (roughly 1" group). Loading was easy on a barrel with 30 plus shots prior to trying the PB Plats.

This will be my "conical" of choice if it passes my expansion tests. Im fairly sure they will. The sectional density and BC is higher than any other PB so my guess is they will be deadly on deer and maybe hogs.
 
I would be curios to see how that 300 grain bullet performed over 70 grains of any black powder or substitute .............45/70
 
80gr RS
300-plat45.jpg

300-plat45-2.jpg



300's @ 20 yards.
plat-4-300.jpg

plat-5-300.jpg
 
I'm impressed..............I have a traditions With a 1 in 20 twist I think would sling them 300 grainers pretty slick
 
Damn i hate PowerBelts.....except this one. :D

These 45cal 300gr Plats are just amazing and load with just finger pressure. This is another group from a bore with over 20shots and then some moly coated conicals and no swabbing at all. Plus no cool down time.


This 3 shot group was loaded as fast as i could safely
PBbeltPlat300.jpg
 

Latest posts

Back
Top