Green Mntn LRH .45 barrel on eBay

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 11, 2018
Messages
8,321
Reaction score
11,893
I know somebody is always looking for one of these.
Ebay item #223351667983
He's got a start of $200. Ive no idea if that's a good price or bad. But there aren't many around.
 
I bought one from Gunbroker couple years back for $160 I believe, NIB. I had to modify the under rib to make it fit my Renegade. I haven't shot it yet, but plan to one day I guess, its on the heavy side not sure I want to take it hunting, but range work will work for sure. These barrels are shooters from everything I have seen an read.
 
I don't know why, but I bid on it.

Here is one in 50 Cal that recently Sold, Don’t be surprised if you get outbid :eek:

LcsZ7kM.jpg
 
I bought one from Gunbroker couple years back for $160 I believe, NIB. I had to modify the under rib to make it fit my Renegade. I haven't shot it yet, but plan to one day I guess, its on the heavy side not sure I want to take it hunting, but range work will work for sure. These barrels are shooters from everything I have seen an read.

ToyTruck, Are you the one that Chopped the under Rib off, instead of making the little Notch in your Stock that is Hidden with your Ramrod? :p

Most fit like a Glove, But now and then you need to make this little Notch, Takes about 2 minutes, Or you could Remove the entire Under Rib and Chop a piece off, and Re Blue it. Whichever Floats your boat?
XJWUzTGm.jpg


3 out of 4 of my GM Barrels Fit like this, A Taylored Glove
vTE66qRm.jpg
 
I was just RAZZING ya! But it is obviously much easier to remove the little notch in the Stock :D
Probably is I really didn't have that much of a problem. Just remove the under rib, sand about 1/8" off with disk plate on drill, cold blue, reinstall under rib and lock tite the screws. Where there is a will there is a way...;)
 
Educate me, by looking at the bore what indications tell you its toasted
 
Back
Top