Search results

Calculated Bullet length for 1-28 and 1-24 twist Twist 1-28 Twist 1-24 Diameter Bullet length in inches Diameter Bullet length in inches .458 1.10 .458...

Our Walmart just started the close out sale they have Shock Waves for 9 and Blackhorn for 30 and many other goodies it might be worth your time to check around.

Since I use heavy loads and hunt some open areas and thick timber I would like to find more information on what bullets stand up to the heavy loads at short range, since I average about one shot a year at 100 to 150 yards and have had a couple at 200 yards I will continue with heavy loads. I...

Mike I know you use and have tried some .458 bullets could you tell me which ones are close to 1.1 inches long? Thank You, Lee

I just got a box of bullets advertised as SST they came yesterday in a box with FTX all over it and in little print on the end it says SST for muzzle loading under the big FTX. They have the same soft red tip as the FTX and they are one number on the part number higher and I think they have the...

Some useful values: 1 grain = 0.037 dram 1 pound = 7000 grains 1 pound = 16 ounces 1 ounce = 437.5 grains 1 ounce = 16 drams 1 dram = 27.344 grains Density of lead is 11.34 gram/cc 1 gram =15.4324 grains 1 inch = 2.54 centimeters 1 meter = 39.37 inches, 3.28 feet and 1.09 yards pi = 3.14159...

Well I like the looks of it so I finally bought one. Since I am taking care of my wife [knee, total replacement] it will be a bit [like a couple weeks] before I can shoot. Since I will be going on a feral pig hunt shortly there after I would like to inquire of the other Endeavor owners if it has...

I cut one of them apart they are similar to the SW but the jacket appears to be a bit different. I shot a 5 shot group at 100yds with 120 gr BH the first two shots with a bit of oil burning out of the barrel were a bit right the next 3 made a decent group right at 1.5 inches. I changed the load...

I have a chance to buy a bunch for about 55 cents a piece. These are flex tip interlock bullets 44c .430 265 gr 45c .452 250 gr 45c .458 325gr Has any one used these ? any information on how they shoot or open up would be appreciated. Lee

I went to the range today put a new Nikon Omega scope on the Triumph, since some one had ask about using the Omega with the Short Black and BH I thought I would check it out after sighting in for hunting I shot both guns for group. The groups were about the same .80 for the Triumph and .85 for...

Ron Bugg Jr has informed me that they are begging production on a Crush Rib 50 cal barrel 40cal bullet sabot. There have been a number of us asking for it now its just a matter of time. Lee

I always thought they were the same; but I just read a report on them by MAX that says they not only shoot different but the ballistic jell test shows the SST holding together as good as the bonded SW in the 250 gr bullets. Now I always used the shock wave and I would like to know what the...

Went to Memphis wife wanted to vist friends and I alwaays turn those trips into goody hunts, I a Walmart in Memphis I found some FPB for 7 dollars a carton so haveing low resistance I bought some always like to try new things. After I done my regular shooting and the barrels were hot I decieded...

The 260gr Speer,had some laying around and wanted to do some BH shooting with my Omega,I put 110 BH in and was shocked to see my first group measure 5/8" I though maybe a fluke so I whent back to the bench and put two more down rangechanged the group tp 3/4". I felt so bad about it that I am...

I was just thinking what I might get when I realized that with 1/2 inch groups with several loads and the added velocity with no wipeing between shots and no worry about corrosive powder I already have everything I was going to switch to smokeless for. Black Horn 209 does every thing except work...

There are several things we might consider besides the ignition, like how much blow back you get because even if its not corrosive we end up cleaning it out. I am not sure how deeply accuracy enters into it as every thing I have tried it in has had a number of very accurate loads my average...

B209 cleaning solvent by Montana X-Treme, have any of you tried it for BH209 if so how well does it work compared to Hoppes #9? :?: