Search results

Sold..thanks

.

Yep

26" Brux barrel ASG Pre-fit/ no brake ASG Breech Plug / 25 modules 700 Rem SA Stainless Bolt Stop Rifle Basix Trigger 2# Boyds Laminate Stock Aluminum Pillared/ Glass Bedded Warne Mount/ Warne QD rings 6x24x50 Sightron 111SS I sighted this rifle in and hunted Antelope with it last year...never...

This Muzzleloader has been sold.. Thank you Zen

More data... Forgot to mention...I've got plenty of bullets we can talk about

Check me out in the classifieds

700 Remington S/A 26" PacNor prefit barrel 1/16 Twist ASG Gen 2 Breechplug /20 Modules Rifle Basix Trigger set at 2# Boyds Laminate Stock / Glass Bedded / Aluminum Pillars. Warne one piece base / Warne QD Rings. Weaver SuperSlam 4x20 Scope Rifle without scope and rings $1600 Rifle with scope...

That's some good shooting for sure👍

The .458 bullets that Dennis offers are to be used either with a full form sizing die in a 45 cal barrel or can also be used in a 50 cal barrel with either a Orange mmp or a Harvester black crushed rib sabot...Generally 45 cal barrels are .450- .452 from land to land . If you are planning to...

https://www.centerpunchusa.com/ Here's your man...

I've used several of these ignition systems on bolt guns and one on a Encore conversion...By far the best thing going...no leaks and very efficient ignition... You get more than just a plug..20 brass modules are included also..On what I've read about the ignition problems and the stuck plugs...

There you go... https://www.arrowheadrifles.com/product/uml_replacement_plug/

Great post...keep up the good work

Here's an exit wound from a 290 TEZ at 300yds....Took out both shoulders

This 195 Barnes BX was recovered under the hide on the left hindquarter...It entered straight on in the brisket traveling the full length of the deer. The distance was 190yds with a muzzle velocity of 2700fps... I've killed several nice bucks with the all coppers 195Bx, 250TEZ, 290TEz's between...

Another thing to consider ...I mounted the pillars to standoffs prior to epoxy...wrapped a couple wraps of tape at both ends of barrel to provide a free float clearance between barrel and forend when complete...set the barrel with epoxied pillars installed into the forend...taped the two...

Keep the dovetail stand offs on your gun...I used 1/2" aluminum pillars...Adjusted the length of the pillars to make contact with stand off...contersunk the pillar to keep forend screw centered...It makes a solid mount plus it will keep your forend from splitting.... Zen

I agree with GM54.... I've had a few of both actions...the best thing going is the LRMP ignition system...with the M700...either long or short will work...If you're going to use a later model RR series action chances are that you'll have bolt timing issues. This will cause extraction problems...

Call this guy before you make your decision on the Scout conversion... He's the best that I know of that does them. https://www.centerpunchusa.com/