Search results

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. BuckDoeHunter

    My New Knight TK2000

    Here it is, all ready for it's first range session, hopefully that will come soon. I'll start off with 90 grains Volume of Triple 7, most likely #5 nickel plated shot, TPS 3.5 inch shot cup, and a OSC of some type. Load suggestions are always welcome.
  2. BuckDoeHunter

    LimbSaver Recoil Pad Knight TK2000

    My TK2000 arrived yesterday and I want to put a LimbSaver recoil pad on it. Is there one that is made to fit? Or a slip on pad that fits?
  3. BuckDoeHunter

    TK2000 from Knight Shooter

    Thanks Knight Shooter! As advertised, fast shipping, great communication via Conversations.
  4. BuckDoeHunter

    Boyds Remington 700ML Stock

    A few months ago while looking at the used muzzleloader section, I came across a very nice, lightly used, stainless steel .50 cal Remington 700ML with #11 ignition. I think I'm going to keep this one as is (except the stock and trigger) unless it doesn't shoot well. If it's not accurate, I may...
  5. BuckDoeHunter

    Knight Elite Boyds Stock

    Even though the Knight Elite stock is pretty good, I really do like my laminate stocks :cool: Boyds had some sales going on a few weeks ago so I got one for my .50 cal Elite. I thought about getting the exact same stock as the one on my blued .45 cal Elite but where's the fun in that. Boyds...
  6. BuckDoeHunter

    rp10ml

    Easy transaction, fast shipping, great communication, I was going to buy his other brake but it sold too fast! :cool:
  7. BuckDoeHunter

    Rusty2014

    Great communication, fast payment, enjoy your new Mountaineer!
  8. BuckDoeHunter

    SOLD Leupold Rings and Bases

    1 inch rings and I believe Medium height. When a 42mm scope was mounted, it had good clearance but was not too high. Large base screws have some slot damage from screwdriver use. One area of a corner has some finish gone. $40 Shipped
  9. BuckDoeHunter

    SOLD Knight 50 Cal. Mountaineer

    Knight 50 cal Mountaineer Excellent condition Shadow gray straight stock Factory bare primer jeweled bolt with breech plug Also includes a shimmed Lehigh bare primer breech plug with removable vent liner. Federal 209 primer was used to demo the amount of crush on the primer Factory sights...
  10. BuckDoeHunter

    billyzink 50 cal Elite

    Great transaction, perfect condition Elite with scope, fast shipping, very well packaged, a pleasure to deal with, thanks again!
  11. BuckDoeHunter

    Dusted Off the Knight Disc Elite 45

    Beautiful day here in Iowa, temp. 45*F, light winds, sunny skies. I haven't been to the range for a while, so I decided to take the Elite for some much needed shooting. Elite 45 cal. in a Boyds laminate stock, bare primer LeHigh breech plug. All shots at 100 yards with 120 grains BH209...
  12. BuckDoeHunter

    First Time Hunting with a Crossbow

    I tore my bicep last week and can't pull my compound bow back, believe me, I tried. I applied for a temporary crossbow permit and got approved. Man, this TenPoint Turbo XLT 2 crossbow can shoot! I don't like the weight or noise of it compared to my BowTech bow, but being able to hunt trumps...
  13. BuckDoeHunter

    Apex .243 All Dressed Up...

    All dressed up and nowhere to go...so I thought. I looked for my supply of .243 ammo but only found empty cases. I finally found a box and a half under some boxes of .22LR ammo, I was very happy. I bought the Apex action and stocks from D55 (thanks again!). I had my .243 barrel for sale last...
  14. BuckDoeHunter

    Niece's First Deer

    My Niece has been wanting to hunt deer for a few years now, she decided this year she was going to go. It was a nice cool afternoon during Iowa's early muzzleloader season. I glassed this buck at 150 yards out, too far for her to shoot. Initially, he walked out of sight around a small hill in...
  15. BuckDoeHunter

    Reloder 7 with 200 Grain SST

    I took my Daughter's RemPac 45 out to the range to sight in a couple of loads. I'll try to chrono this load in the future but from the traces I looked at, it should be somewhere around 2450fps. I first shot 3 Barnes 250 grain FF bullets to see where they would print then let the barrel cool...
  16. BuckDoeHunter

    Check Your Muzzleloader Before Loading

    It's getting to be that time of year when folks are hitting the range and preparing for this falls hunting season. Checking for a load or barrel obstruction only takes a couple of minutes and could save limbs or your life. When I load a muzzleloader and plan to use it later, it gets labeled...
  17. BuckDoeHunter

    Vegetable Deer Soup

    I was going to grill some deer steaks but it was windy, rainy, and down right cold. My wife said "Soup sounds good." Perfect! I used some frozen broth I had from roast drippings. It actually sleeted o_O while we were enjoying our hot soup. Come on fall and hunting season, I need more stew meat!
  18. BuckDoeHunter

    285 grain Bear Creek Ballistics Accuracy Test

    Beautiful morning to shoot. Temp. at 57*F, very light winds. All shots at 100yds, using a duplex load of 10 grains N110 with 57 grains H4198, Federal 209A primers, Full Formed sized. All shots out of my Rem 700ML Smokeless conversion with a heavy contour barrel, this load combo has some...
  19. BuckDoeHunter

    Finally Out of Jail

    My new Bear Creek Ballistics all copper, machined, 285 grain ballistic tip bullets are finally out of USPS jail and in my hands:dance: The ones on the left are .452 and weigh 286 grains. The ones on the right are .453 and weigh 287.5 grains. I had them turned with different diameters to see...
  20. BuckDoeHunter

    Apex Liked N110 and 250 Grain XTP

    I had some 35 grain N110 loads from last year in the range box, I figured what the hay and shot some with the 250 grain XTP. 4 shots, smoothed sized, wool wad, 100 yards (the target looks funny because I taped another section up to cover some holes)
Back
Top