- Joined
- Aug 29, 2009
- Messages
- 3,695
- Reaction score
- 1,782
Beautiful morning for some bullet testing, light winds and temp around 65*F.
The .458 250 grain MonoFlex is a copper alloy material and is harder than solid copper. I had to anneal these bullets in order to get them thru my Full Form Brux die.
Before and after annealing, the tip is removed before the bullet is heated, I wonder if there are any aftermarket tips that would work for this bullet?
My annealing station
When the bullet is cherry red, I push it into the can filled with water.
100yd 3 shot group with my heavy contour RemBrux 700ML, 10gr N110 with 57gr H4198, veggie wad, I was pleased
The .458 250 grain MonoFlex is a copper alloy material and is harder than solid copper. I had to anneal these bullets in order to get them thru my Full Form Brux die.
Before and after annealing, the tip is removed before the bullet is heated, I wonder if there are any aftermarket tips that would work for this bullet?
My annealing station
When the bullet is cherry red, I push it into the can filled with water.
100yd 3 shot group with my heavy contour RemBrux 700ML, 10gr N110 with 57gr H4198, veggie wad, I was pleased
Last edited: