- Joined
- Aug 29, 2009
- Messages
- 3,692
- Reaction score
- 1,776
I've shot these before in my smoker muzzleloaders and in the RemPac .45 but I've never tried them Full Formed in my Remingtion 700ML with a Brux .458 barrel, so I had to give it a whirl.
The .452 250gr MonoFlex is a bear to FF size, I had to use a cheater bar on my Rock Chucker press
You gotta love it when the first shot prints almost dead center, my hunting load of 10gr N110 with 57gr H4198, veggie wad, Fed209A primer, muzzle velocity around 2700fps
Next two for a 3 shot group, all shots at 100yds, I'm not sure why they climbed an inch and then went into the same hole, maybe it was because I swabbed the barrel for testing the fit of the bullet and didn't foul it with primers before loading at the range. The B.C. on these is .210 so they drop fairly quick past 300yds, drop at 400yds is around 4 feet.
The .452 250gr MonoFlex is a bear to FF size, I had to use a cheater bar on my Rock Chucker press
You gotta love it when the first shot prints almost dead center, my hunting load of 10gr N110 with 57gr H4198, veggie wad, Fed209A primer, muzzle velocity around 2700fps
Next two for a 3 shot group, all shots at 100yds, I'm not sure why they climbed an inch and then went into the same hole, maybe it was because I swabbed the barrel for testing the fit of the bullet and didn't foul it with primers before loading at the range. The B.C. on these is .210 so they drop fairly quick past 300yds, drop at 400yds is around 4 feet.
Last edited: