CVA Mag Hunter help

Help Support Modern Muzzleloader:

aknott1994

Member
Joined
Feb 3, 2021
Messages
15
My dad gave me his old CVA Mag Hunter and it wont cock or fire. I disassembled the bolt assembly and there is no spring in the bolt. Where can I get this spring or a compatible one? I contacted CVA and they "no longer support" this model.
 

aknott1994

Member
Joined
Feb 3, 2021
Messages
15
Thank you, I was hoping there was a way to just get the spring without ordering the whole bolt just in case there is something wrong with the trigger assembly as well. It all looks ok visually but you never know. I suppose I'll order the bolt and hope for the best
 

GM54-120

Administrator
Staff member
ADMIN
Global Moderator
Joined
Dec 24, 2009
Messages
12,165
I looked for just a spring and didnt see one anywhere.
 

D55

Well-Known Member
Joined
Aug 7, 2018
Messages
656
If you knew the spring tension id/od/wire thickness you could order and cut to size. Or contact wolf spring and see if they'll make one.
 

Caniborrowsomeammo

Supporter
Supporter
Joined
Nov 5, 2020
Messages
153
Like D55 says. But, if you take some measurements of where the spring fits, perhaps I, or someone here could help you order a compression spring from maybe McMaster Carr that will work. Might even be able to find one locally to your location. Would be better as you can try fit before buying.
I.D. of where the spring fits into and O.D. of the firing pin and the approximate length that the spring fits into. We can chart wire diameter and poundage.
 
Top