In need of some .50 cal LEE REAL bullets please!

Help Support Modern Muzzleloader:

WoodsGnome

Member
Joined
Nov 21, 2018
Messages
8
Hello Friends, If this is not allowed please remove!! Im 70 and love my muzzleloader for huntin whitetails! TC Renegade with Green Mt. LRH .50 cal! Is there anyone on here that would cast me say 100 LEE R E A L bullets since I dont have all that is needed to do it at this late stage in life!!I would gladly supply the mold and compensate for the pure lead! Bless U all andTY for any help or suggestions!! Regards, Old John
 

Idaholewis

Well-Known Member
Joined
Jun 30, 2017
Messages
4,738
I don’t use the Lee REALs, But I do know about them. They come in 2 Weights for 50 Cal, 250 and 320 Grain. You might want to Specify what size you prefer?
 

Idaholewis

Well-Known Member
Joined
Jun 30, 2017
Messages
4,738
Hello Friends, If this is not allowed please remove!! Im 70 and love my muzzleloader for huntin whitetails! TC Renegade with Green Mt. LRH .50 cal! Is there anyone on here that would cast me say 100 LEE R E A L bullets since I dont have all that is needed to do it at this late stage in life!!I would gladly supply the mold and compensate for the pure lead! Bless U all andTY for any help or suggestions!! Regards, Old John
Do they have to be Lee Reals? Are you against another Bullet?

I have a 395-400 Grain Custom .50 Cal Bullet that Shoots STELLAR in the GM 50 LRH



 

WoodsGnome

Member
Joined
Nov 21, 2018
Messages
8
Do they have to be Lee Reals? Are you against another Bullet?

I have a 395-400 Grain Custom .50 Cal Bullet that Shoots STELLAR in the GM 50 LRH



Hello Lewis! Cant believe Im talkin to "The Man" his self!! TY for reply Sir! My problem is....I bought the LRH many yrs ago shortly after Mass. allowed rifled barrels...BUT in over ALL those years I have ONLY found 3-4 bullets that would print together out of it!! Remington full bore lead conicle 385gr I think are no longer made....Buffalo Ballets lead full bore 245gr gone too...and 300 gr SST's ! For at least 20 yrs every year Ive fought with it to find a saboted bullet for out to200yds! Sprayed ANY Barnes up to a foot! Id give up and go back to full bore lead and pray shots were close! Suddenly Im 70...goin to hell in a hand basket fast! Have forever givin up the shoot thru the same hole past 100yds quest! But need to maintain a deer chest trajectory out to that 100 now! SO...from what Ive read was hopin the REALs were what I was gonna be happy shootin andthat it liked!! It appears it loves any full bore lead that isnt much longer than it is long!! Lastly..I cant understand why on earth anyone would need over 300 grs for a New England deer that U cant eat half of cause its all bloodshot jello sorry!
 

WoodsGnome

Member
Joined
Nov 21, 2018
Messages
8
And yes was lookin at the 320 gr real....with the thought of drillin a decent hollow point in it to bring it down in weight under 300!
 

michiganmuzzy

Supporter
Supporter
Joined
Nov 11, 2018
Messages
1,849
Did you ever try the t/c maxi-hunter? They come in a 275. Pretty short coni.
 

Idaholewis

Well-Known Member
Joined
Jun 30, 2017
Messages
4,738
And yes was lookin at the 320 gr real....with the thought of drillin a decent hollow point in it to bring it down in weight under 300!
You supply the Mold since I don’t have a Lee REAL, The Lead, and Flate Rate Shipping Box, I will Cast them for Ya. You can buy the Lead From Buffalo Arms, They will put it in a Box on a Shelf just inside the Door with my Name on it and i can pick it up :lewis:
https://www.buffaloarms.com/pure-certified-lead-please-order-in-9-pound-increments-priced-per-pound-purelead

Remember, You can Get the Lee REAL in 250 Grain as Well, That 320 Should be a little Better Choice in your 1:28 Twist Fast Twist. I have actually Talked about Buying the Little 250 just to See if it would Run in my 1:28 GM LRH? To many irons in the Fire :) There is a Guy down South of me that Casts Bullets for Sporting Goods Stores, He casts the 250 REAL, But His Casting SUCKS, I wouldn’t buy them. With me, they will be Cast to Perfection, You can count on that :lewis:

Send me a PM From here if you would like to Do this
 
Last edited:

WoodsGnome

Member
Joined
Nov 21, 2018
Messages
8
You supply the Mold since I don’t have a Lee REAL, The Lead, and Flate Rate Shipping Box, I will Cast them for Ya. You can buy the Lead From Buffalo Arms, They will put it in a Box on a Shelf just inside the Door with my Name on it and i can pick it up :lewis:
https://www.buffaloarms.com/pure-certified-lead-please-order-in-9-pound-increments-priced-per-pound-purelead

Remember, You can Get the Lee REAL in 250 Grain as Well, That 320 Should be a little Better Choice in your 1:28 Twist Fast Twist. I have actually Talked about Buying the Little 250 just to See if it would Run in my 1:28 GM LRH? To many irons in the Fire :) There is a Guy down South of me that Casts Bullets for Sporting Goods Stores, He casts the 250 REAL, But His Casting SUCKS, I wouldn’t buy them. With me, they will be Cast to Perfection, You can count on that :lewis:

Send me a PM From here if you would like to Do this
 

WoodsGnome

Member
Joined
Nov 21, 2018
Messages
8
HI Lewis....cant find how U PM but need U to be parient with me for day or two! Just fell down 5 cement steps and hand and head hit pretty hard on landin! Thank U kindly for your offer that I look forward to doin! I'll get back to Usoon as I can function again.
 

Idaholewis

Well-Known Member
Joined
Jun 30, 2017
Messages
4,738
HI Lewis....cant find how U PM but need U to be parient with me for day or two! Just fell down 5 cement steps and hand and head hit pretty hard on landin! Thank U kindly for your offer that I look forward to doin! I'll get back to Usoon as I can function again.
Take it easy!!

I just sent you a PM, all you need to do is Respond :lewis: Look in the Upper right corner of your Screen, you will see a Mail Envelope, There will be an orange 1 beside it, Meaning you have Mail :lewis:

If you want to PM Someone, just click on their Name, then the option “Start Conversation”
 
Top