White Armstech Whitetail .451 Caliber

[steve egan]

Evening: I have a White Armstech Whitetail in .451 Caliber with a 20" barrel and the barrel is 1" in diameter from the breech to the end of the barrel. How do I determine the Rate of Twist on this White muzzleloader? Any help is appreciated.

Steve

 

[michiganmuzzy]

Aren't all the White .451 rifles 1:20?

 

[toytruck]

Aren't all the White .451 rifles 1:20?

yes they are

 

[sbuff]

X2 what TT said

 

[flounder]

I agree with what's been posted. If you want to check it, use a tight fitting patch and measure how long it takes to make a full revolution as you push your ramrod in. If it takes 20 inches then you have confirmed that you have a 1 in 20 inch twist.

 

[steve egan]

I agree with what's been posted. If you want to check it, use a tight fitting patch and measure how long it takes to make a full revolution as you push your ramrod in. If it takes 20 inches then you have confirmed that you have a 1 in 20 inch twist.

Morning: Thanks for the information.

Steve