blackhorsecr
New Member
- Joined
- Jul 25, 2017
- Messages
- 2
- Reaction score
- 0
Hoping to get some info. on an inline rifle problem. Converted my rifle to 209 primers to increase power and use the pellets instead of loose powder due to ease of loading and wet weather conditions during hunting. After installing new kit consisting of firing pin, spring,rod, breech plug and 209 primer nipple test fired without powder charge to make sure firing pin would make contact with new primer. it made good contact and set off primer but jammed the trigger assembly in the full back position. Took apart and reset trigger assembly ,trying it again same thing happened as first shot. Anyone have a remedy for this situation?