- Joined
- Oct 1, 2009
- Messages
- 3,391
- Reaction score
- 1
:scratch:
Was at the range yesterday with my T/C Renegade .54 cal ml'er and everything was working great until I tried to zero in at the 25 yard bench. My first 3 shots were touching at the top (dead center 12 o'clock) of my Birchwood Casey sighting in target that's broken down into 1" increments. I was happy thinking that all I had to do is lower the rear sight and all would be ok. I kept lowering the sight screw and by the time I was done, the best I could get was still 3.5/4"s high at 25. I was dead center but hitting the top of the orange ring when I aimed dead center. Screw won't turn any more.
I was shooting 50 grains of 3F Goex with Remington #11 per/caps pushing out a .530 ball w/ a .015 lubed patch.
Any suggestions on how to rectify the problem :?:
Ray.............. :scratch:
Was at the range yesterday with my T/C Renegade .54 cal ml'er and everything was working great until I tried to zero in at the 25 yard bench. My first 3 shots were touching at the top (dead center 12 o'clock) of my Birchwood Casey sighting in target that's broken down into 1" increments. I was happy thinking that all I had to do is lower the rear sight and all would be ok. I kept lowering the sight screw and by the time I was done, the best I could get was still 3.5/4"s high at 25. I was dead center but hitting the top of the orange ring when I aimed dead center. Screw won't turn any more.
I was shooting 50 grains of 3F Goex with Remington #11 per/caps pushing out a .530 ball w/ a .015 lubed patch.
Any suggestions on how to rectify the problem :?:
Ray.............. :scratch: