Wonder how big of a powder chamber he's got? Running that much powder.https://hanksmessageboard.freeforums.net/thread/3526/shooting-40
https://hanksmessageboard.freeforums.net/thread/3540/more-cal-testing-400-yards
Check out the Links Above
H322
H4895
IMR3031
IMR4166
RL15
Varget
VVN530
I've had the Most Luck with IMR3031 some say it is Not Temperature Stable??? Never used it January.
Wonder how big of a powder chamber he's got? Running that much powder.
Heck of a powder stack!!Dunthat’s Rifle doesn’t have a Powder Chamber, don’t know about doug136
Heck of a powder stack!!
At how much? In the post was 84W(?) of BH209Yes, it is but look at dunthat’s ES of 11 with IMR3031 so it is Burning Completely & Efficiently. This is also my experience without a Powder Chamber
I read ALOT of his posts on the 45.SW has had a lot of experience with the .40
PM SW over on Hanks. He has switched to .40s. SW is a wealth of information on SMLs.I read ALOT of his posts on the 45.
10-4. Totally agree.PM SW over on Hanks. He has switched to .40s. SW is a wealth of information on SMLs.
I'm guessing no one has used it.N130?
I’ve not used it, and I don’t know of anyone else using it in a .40.I'm guessing no one has used it.
If there is a chance/choice, I prefer the VV line of powders. N130 and N133 is very close/similar to 3031.I love 3031 and use it in several rifles from .250/3000 to 45/70. It's a very versatile powder that gives great accuracy. Yes, I'm talking about cartridge rifles as I do not use it in front stuffers. But it is temperature sensitive. In my .350 Rem mag velocities ran about 60 fps to 70 fps at around 40 degrees. Accuracy seems pretty much unaffected and a little bit of velocity loss hurts nothing.
What bullet weights? I guessing with that powder, you gotta run the heavyweights for a clean burn?I’ve not used it, and I don’t know of anyone else using it in a .40.
Before I got my .40 build back I bought 4lbs of ACC 2495.
I did not like it at all. It was almost as bad as shooting T7 with the crud build up & quick too. After only a handful of shots I HAD TO clean my bore to be able to load it again.
Has anyone else used that powder, with what bullet weights & what were the results?
Perhaps my bullet weight was the contributing factor. I was testing with 200g SST/SW’s & 225g Fury’s.What bullet weights? I guessing with that powder, you gotta run the heavyweights for a clean burn?
Perhaps my bullet weight was the contributing factor. I was testing with 200g SST/SW’s & 225g Fury’s.
I do not want to shoot heavyweight bullets in this gun at all. The absolute heaviest bullet that I’ll ever run thru it is 240g.
Enter your email address to join: