Savage sabot recommendation

[ruger6x45]

I have .458 325ftx to use in my ML2, red crush rib harvesters are a tad too loose, black crush rib harvesters are too tight, I tried factory 300gr sst sabots as well as 250gr sat sabots, both are too tight. So which sabot do I need? Something tighter than red crushed rib and looser than a black crushed rib. Thanks

 

[MeatMachine]

Mmp and harvester makes 50/458 sabots.

 

[MeatMachine]

One of those are what you need.

 

[ruger6x45]

One of those are what you need.

I was actually wrong with what I stated, so black crush ribs are way too tight, I don't have red crush ribs it was a different brand

 

[MeatMachine]

If you’re are shooting the a .458 ftx you should use a 50/458 sabot. Only if someone has a loose bore the the black 50/452 crush rib sabot would be necessary.

 

[ruger6x45]

If you’re are shooting the a .458 ftx you should use a 50/458 sabot. Only if someone has a loose bore the the black 50/452 crush rib sabot would be necessary.

Yes sir, I thought I had red harvesters and they were way too loose in the bore, so that made me think my bore was huge. Then I tried a black harvester and it wouldn't even go in the barrel and I realized the red sabots were not harvesters