I don't use 1 in mine.does the breechplug from precision rifle use an o ring like the metrics plug did?
Can you post a picture?Well I solved the problem. I drilled out the primer pocket on a 45/70 cartridge to take a 209 primer. I than cut down the 45/70 case to ,31. I placed a small o ring around the shell nub and put it in the Huntsman. Works perfectly and I don’t have to look for the plastic primer holders. Now to try it at the range.
Where did you get the breech plug for the 209 primer?I have a Huntsman for sale in classified section. Comes with 209 breech plug and also with the plastic primer holders.
From the pictures it looks like the breechplug from Metrics Unlimited. I am pretty sure that 1 is not available anymore.Where did you get the breech plug for the 209 primer?
I think Legigh Valley. It has be4en a while.Where did you get the breech plug for the 209 primer?
How does the oring around the 4570 case rim seal up with the big slots in the breech plug?Well I solved the problem. I drilled out the primer pocket on a 45/70 cartridge to take a 209 primer. I than cut down the 45/70 case to ,31. I placed a small o ring around the shell nub and put it in the Huntsman. Works perfectly and I don’t have to look for the plastic primer holders. Now to try it at the range.
It seems to seal up at the case head of the 45/70. When I shoot it I will see if there are any blowback problems. It might need a fatter o ring.How does the oring around the 4570 case rim seal up with the big slots in the breech plug?
Enter your email address to join: