Hello

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
Hello, quick question. I have several different pistols and a rifle. I have
a CVA 1861 Navy in 44 and a jukar 45 pistol. These 2 take a #11 cap. Can I swap the nipples for #10 to make it simple. My ROA, Pietta 1851 and my cva Carolina 45 rifle all take #10 caps.
Another reason for switching is I have more #10s then #11s*.
 

UndeadPoet

Well-Known Member
Joined
Dec 2, 2020
Messages
615
Reaction score
309
Probably, yes, if you can find the correctly threaded #10 nipples for them.
 

UndeadPoet

Well-Known Member
Joined
Dec 2, 2020
Messages
615
Reaction score
309
Hmm…I am not that familiar with the spec differences between #10 and #11 nipples or caps. Are the 11s fitting too tightly or are they too long on those pistols? I can possibly see the issue with the revolver, but I can’t see how a cap would interfere with frame on a single shot colonial pistol. Can you share pictures of your dilemma? Thx!
 

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
20220711_122700.jpg
 

Attachments

  • 20220711_122613.jpg
    20220711_122613.jpg
    1.1 MB · Views: 1
  • 20220711_122735.jpg
    20220711_122735.jpg
    1.1 MB · Views: 1
  • 20220711_123902.jpg
    20220711_123902.jpg
    1.1 MB · Views: 1
  • 20220711_123818.jpg
    20220711_123818.jpg
    849.7 KB · Views: 1

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
The first 4 pictures are of the nipple, how high the cap sets just by fingers. Where it contacts Fram and then pressed on with wooden dowel, causing deformation. Last pic is one other nipple with cap placed with fingers and the hight. Which works well. So my nipples need replaced or.
 

CVA Fanboy

Supporting Member
Supporting member
Joined
May 27, 2021
Messages
205
Reaction score
117
Usually there would be no pop. On bad cones/nipples or they would be mushroomed, easily spotted if not firing or not consistent ignition. then I would change. If I am going to change I`d go slix shot, yes a little more expensive but well worth it. Now I have got new revolvers and just changed the nipples to slix I just like them better. Of course I have only used 100 #10 caps(Remington) Switched to CCI #11s then started making my own #11`s.
 

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
I was actually able to thread the nipples part way I to a rod I had laying around just enough to hold without damaging the threads. I then took emery cloth and was able to polish the caps until.the #11 went on with fingers enought to clear the frame.
 

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
SE Nebraska
Working on a cylinder press
May not work but had to try.
 

Attachments

  • 20220715_005345.jpg
    20220715_005345.jpg
    1.5 MB · Views: 1

JohnBaxter

Member
Joined
Jul 10, 2022
Messages
22
Reaction score
13
Ended up scraping the counter lever idea and went straight pull. Works like a wet dream.
 

Attachments

  • 20220722_033114.jpg
    20220722_033114.jpg
    449.6 KB · Views: 0
  • 20220722_033123.jpg
    20220722_033123.jpg
    452.8 KB · Views: 0

Latest posts

Top