Kansas Kid
Member
- Joined
- Mar 10, 2023
- Messages
- 8
- Reaction score
- 10
My first inline muzzleloader. It’s a build by someone that I just got off gunbroker. What I know so far is it’s a .40 cal .402x.420 ish square cut bore with about 1-48 twist. Which is good as I wanted a round ball gun. LH stock from a bolt action center fire rifle glass bed to barreled action. #11 standard 1/4-28 nipple. Redfield Olympic sights. Nice trigger that pulls at 10oz.
Nipple that came with it was short and would not have fired it so I installed a new longer one and the striker would hit the nipple so I put a shim in to just miss the hitting the nipple. Seemed like the thing to do ?
There are no markings on anything so can anyone ID the action and trigger. And is there a long skinny nipple wrench people use on these ?
Thanks in advance.
Nipple that came with it was short and would not have fired it so I installed a new longer one and the striker would hit the nipple so I put a shim in to just miss the hitting the nipple. Seemed like the thing to do ?
There are no markings on anything so can anyone ID the action and trigger. And is there a long skinny nipple wrench people use on these ?
Thanks in advance.