Do you own a Remington 7400, 7600, FOUR, SIX or 750

[Underclocked]

If so, I would ask you for a huge favor. What I need to know is the hole spacing for the mount base screws as closely as you can measure. Any help greatly appreciated!

 

[wesley396]

Do you own a Remington 7400,7600,four,six,or750

center to center from the front screw to the rear screw is 3 1/2 inchs

The front 2 screws are 7/8 of a inch a part (center to center

The rear 2 screws are 5/8 of a inch apart ( center to center)

 

[Underclocked]

Wesley, Thank You.

What I'm looking for is .860 and .504. We could live with adding a hole if needed on the .504 end, and it sounds like it would need that at least.

 

[wesley396]

dDo you own a Remington 7400,7600,four,sixor 750

Underclocked , I took the measurements from the bottom of a Leupold 1 piece mount for a 7400 .