Knight DISC bolt disassembly

[derfhunter]

I was looking for a link about the bolt dissassembling method.
I can not seam to find it and need instructions on how to do it.

 

[txhunter58]

http://krwarranty.com/

Click on Knight rifle manual on the right and it has instructions

 

[derfhunter]

I was referring to the original D.I.S.C. bolt.
I thought you needed the c tool to disassemble the bolt

 

[ShawnT]

I don't have the DISC in my manuals. Unless I am mistaken the C tool is just placed between the secondary saftey and the bolt shroud. Then screw the saftey in until the cocking peice retracts enough that you can unscrew the bolt. I have heard that in the absentce of a C Tool you can use an open end wrench. When you reINSERT IGNORE the firing pin assembly screw in till it stops, back up till the cocking peice lines up with the small notch in the bolt, then unscrew the secondary saftey till the cocking peice sits in the notch and you can remove the C tool.

 

[sabotloader]

I was referring to the original D.I.S.C. bolt.
I thought you needed the c tool to disassemble the bolt

See if thi picture helps... I just use a 7/16" open end wrench to sub for the 'C' tool

 

[derfhunter]

Thanks Guys,
That is what I was looking for.