Need Parts TC Firehawk

[forrest-hunter]

Have a 58 cal TC Firehawk that I switched to use 209 primers - want to switch back to musket primers but have misplaced parts - does anyone have striker, ect. I need? All Firehawks use same parts.

 

[wolfer]

The striker for 209 should work for musket caps. Had 2 Firehawks and as I remember the 209 striker will work for caps. I may be mistaken but give it a try W/O a load and see if it ignites the caps. W

 

[Confederate rifleman]

A .58. Jealous... My first muzzleloader deer, a 6 pointer, fell to my repop 1853 Enfield rifle.musket. At least Yankee deer take hits! A Lyman 575213OS driven by 70 gr of Elephant 3f ( pretty decent powder. Miss it.). A 50 yard BOOMflop. Made quite a hole I must say...

 

[forrest-hunter]

Thanks for info.- stricker did work with musket cap - got that problem solved - now need to find a long nipple wrench

 

[Dredd_UK]

Thanks for info.- stricker did work with musket cap - got that problem solved - now need to find a long nipple wrench

Did you ever find one? I have a 50cal Firehawk and cannot get a nipple wrench anywhere!

 

[toytruck]

Did you ever find one? I have a 50cal Firehawk and cannot get a nipple wrench anywhere!

https://www.amazon.com/Breech-Nippl...es&qid=1657806948&sprefix=cva,aps,169&sr=8-19
This should work on your FireHawk I would think.

 

[Dredd_UK]

https://www.amazon.com/Breech-Nippl...es&qid=1657806948&sprefix=cva,aps,169&sr=8-19
This should work on your FireHawk I would think.

Thank you Sir - ordered

 

[Dredd_UK]

Thank you Sir - ordered

It arrived but unfortunately it is too thick to go down the receiver! Does anyone know of anything else that might do the trick?? cheers!

 

[Okie Hog]

- now need to find a long nipple wrench

Here is a link to nipple wrenches for sale:

https://muzzle-loaders.com/collections/muzzleloader-wrenches
IMO: They cost too much, so i made one from steel rod:

 

[toytruck]

It arrived but unfortunately it is too thick to go down the receiver! Does anyone know of anything else that might do the trick?? cheers!

Well shucks! Sure looked good. Good luck finding one, making your own might be the only option.

 

[Dredd_UK]

Here is a link to nipple wrenches for sale:

https://muzzle-loaders.com/collections/muzzleloader-wrenches
IMO: They cost too much, so i made one from steel rod:

I may have to do the same Sir - unfortunately none of the US Suppliers will post to UK - thanks for the advice