- Joined
- Aug 20, 2019
- Messages
- 3,650
- Reaction score
- 7,600
I’m shooting the Barnes .40 195g Expanders in LBCR sabots.
I shot last wk at 50 & 100yds.
I put 2 in the same hole at 50yds 3/4” high ( pic #1)
(Pic #2) is my 100yd zero.
One shot.
I shot today at 150yds then 200yds ( Pics 3&4)
(Pic #3) when I figured out what my hold over is. One shot.
150yds.
(Pic#4) is when I figured out what my hold over is. One shot. 200yds.
My effective hunting range with this load is 220yds when I get down to 1020 ft lbs ke
My MV Avg. 2479fps
With this gun shooting this load, that well, there no excuses for any misses.
Pic 1 I have tape over the 2 shots in the same hole. I traced it out with the marker bc as you can see, I used the target at diff ranges. It’s a portable target stand. Pics 2,3,4 are all bullseyes.
I’d say that my load testing with these bullets is DONE!
I shot last wk at 50 & 100yds.
I put 2 in the same hole at 50yds 3/4” high ( pic #1)
(Pic #2) is my 100yd zero.
One shot.
I shot today at 150yds then 200yds ( Pics 3&4)
(Pic #3) when I figured out what my hold over is. One shot.
150yds.
(Pic#4) is when I figured out what my hold over is. One shot. 200yds.
My effective hunting range with this load is 220yds when I get down to 1020 ft lbs ke
My MV Avg. 2479fps
With this gun shooting this load, that well, there no excuses for any misses.
Pic 1 I have tape over the 2 shots in the same hole. I traced it out with the marker bc as you can see, I used the target at diff ranges. It’s a portable target stand. Pics 2,3,4 are all bullseyes.
I’d say that my load testing with these bullets is DONE!