- Joined
- Jan 3, 2021
- Messages
- 57
- Reaction score
- 59
I have 2 of these . They are both are accutriggers . I contacted Savage by email 6 weeks ago . Still no reply . I gave them the serial numbers hoping for an answer to the action screw spacing . I put 2 screws in the 2 action holes adjusthem to the same height & used a digital caliper with the outside measurement points placed in the center of each Allen screw head . I keep coming up with 4.116”. I need some input on the 3 measurements that Savage used on action screw spacing . I had one of the firearms glassbedded & new pillars put in . Ever since I had this done I can not get the weapon to zero . Windage is perfect but I run out of elevation clicks even at 25 yards it is still a foot low with no clicks left . I have tried different rings 6 different scopes 5 different bases all with the same results . I even tried the scopes on a different firearm & was able to zero everyone of them . The Savage was fine until I had the work done . My simple mind with simple logic tells me that the fit relationship between stock & barreled action is causing the problem . To much downward pressure on the muzzle end or basically to high in the action end . It seems that the glass bedding might be the culprit to much height in the back pushing the front down so far that no scope regardless of how many elevation clicks it has can adjust out the difference . So I thought I would get a new laminate stock from Boyd’s & go from there . Ergo the need for action screw spacing . Suggestions for a confused Vietnam Veteran that is weapon mechanism oriented . I should have left it alone but was trying to tweet out a little more distance accuracy .
Quote Reply
Report
T
Quote Reply
Report
T