- Joined
- Jan 15, 2016
- Messages
- 3,733
- Reaction score
- 2,992
It’s what GM54-120 said
I finally had time to check it out. Here's what I did and found.
I took the internals out of the bolt, installed the new breech plug, and tried the bolt without the adapter. It closed fully from its own weight, no problem. I then tried the same with a Fed209A primer. I was able to close it but it was VERY hard the last 1/3 to 1/2 of the travel. The primers seem too tight in the plug, they have to be pried out and some wouldn't go in half way. Makes me wonder about the primer pocket dimensions. The last thing I did was try to close the bolt with the adapter installed and it would not close,Ike the adapter is too long.
Thoughts?