Awesome thanks for the video
Mr. Lewis are you paper patching these? not gonna lie ive tried paper patching bought onion skin 9lb paper i didnt have a template so attemptd the math mine were for a 535 grain no excuse the bullets measured .540 and dropped to the bottm of my barrel later finding out from lyman my great plains hunter bore should be .542 ive read some of your stuff and like you i like big heavy bullets
How do you deal with the issue of leading shooting all these full bore lead bullets?
We were getting all of the rain. It wiped out several sections of Interstate 70. (Wiped out as in destroying several bridge decks, tearing out 40 foot sections of roadway and almost damming u the Colorado River...85 Grains of Swiss 2F I have everything ready, Im hoping for Rain, itās supposed to Rain a little this Evening, and tomorrow, It is SCARY Dry here right now. I have some BIG .54 Cal Bullets to Shoot as well. Hopefully Day after tomorrow
Art, I love that wide Hollow Point!Looks like they shoot well. Had Tom make that mold a few years ago - basically my 50cal version of the AC Gould. I also made it in 52.
Ed might recognize the bullet as we did some HP diameters with it in his low Vel test.
I never shot it in a 1:24.
Good work.
View attachment 16168View attachment 16169View attachment 16170
Art, I love that wide Hollow Point!
Oops, My Bad. Another Sr Moment. Having them a lot lately.Art? That is Rick
Most MZās donāt shoot fast enough (using heavy lead) to pose a problem, use a good lube and fire away. If youāre getting leading, I would follow @Idaholewis barrel break in procedure. A rough bore would be all that would cause leading.How do you deal with the issue of leading shooting all these full bore lead bullets?
Does Accurate Molds have a copy of the Bullshop 460?Accurate Molds #50-488M Shoots awesome in my Rice 1:24 Twist .50 I will try a few of my Lighter Bullets next, My Bullshop 450-460 Grain, the i Bullet, and maybe the Lyman Plains as well.
3 Shot Group, 60 Yards, 85 Grains of Swiss 2F, with .54 Cal 1/8ā Thick Wool felt Wads
Does Accurate Molds have a copy of the Bullshop 460?
Lew what are you using to size your .50 cal bullets?Yes, I sent an Original Bullshop Bullet to Accurate Molds and had Him Copy it as close as he could, He got it SPOT ON I ended up having it Made different though, I did away with the Taper Design since i size per Gun, and the Bevel Base. The Original Bullshop is a REALLY LARGE Bullet, Dan of Bullsop Sizes them to your Bore on Request, Straight from the Mold they are BIG
Accurate Molds #51-450M
Lew what are you using to size your .50 cal bullets?
Enter your email address to join: