- Joined
- Jun 18, 2009
- Messages
- 805
- Reaction score
- 211
A 209m primer will shove a loose fitting bullet-wool wad and most of the powder out of the bore, smokeless load.
I have not had a tight fitting bullet-sabot (60+3 of loading pressure) exit the barrel but it will move.
I believe when you have a good seal at the primer and breach plug with a closed breach system it will shove them out (loose fitting bullets).
On a gun with open breach system or a leaky system where the pressure can come back thru the plug or nipple, this is less likely
to push it clear out
I have not had a tight fitting bullet-sabot (60+3 of loading pressure) exit the barrel but it will move.
I believe when you have a good seal at the primer and breach plug with a closed breach system it will shove them out (loose fitting bullets).
On a gun with open breach system or a leaky system where the pressure can come back thru the plug or nipple, this is less likely
to push it clear out