CVA firing pin bushing threads

Discussion in 'Troubleshooting' started by MMDC, Aug 10, 2019.

Modern Muzzleloader

Help Support Modern Muzzleloader:

  1. Aug 10, 2019 #1

    MMDC

    MMDC

    MMDC

    New Member

    Joined:
    Aug 10, 2019
    Messages:
    2
    Likes Received:
    0
    Female threads holding firing pin bushing are poorly machined and bushing is difficult to properly seat. Want to dress up threads but uncertain of proper size tap. Any one know correct size or have other suggestions. Hate to deal with CVA as would likely require shipping rifle to them and a lengthy turnaround.
     
  2. Sep 3, 2019 #2

    MMDC

    MMDC

    MMDC

    New Member

    Joined:
    Aug 10, 2019
    Messages:
    2
    Likes Received:
    0
    Sorry my post didn't contain enough details regarding which CVA rifle involved. After some trial and error fittings I believe the answer to my question is that the female threads in the receiver of a CVA Accura V2 is 8mm by 1.00. Hope the information might be useful to someone.
     

Share This Page

arrow_white