- Joined
- Aug 29, 2009
- Messages
- 3,697
- Reaction score
- 1,787
Great Info!Im an idjit. If i had just turned the rifle over... View attachment 6021
nummy, that's great that it worked, good luck on the upcoming season
Great Info!Im an idjit. If i had just turned the rifle over... View attachment 6021
Most likely the e-clip fell off. I took my Apex buttstock off, it's just like my son's Accura and I'm guessing the same as your PR rifle.
When you turn the screw to lessen the trigger pull, the e-clip will bottom out on the action and prevent the screw from coming all the way out.
Red circle area shows the trigger adjustment screw and clip
The action is turned upside down for a better view of the clip and screw.
I''m guessing you should be able to install the e-clip with no trouble
There is a slot on the screw where the clip snaps in, my clip is tight and will not move freely unless I apply pressure to it
Enter your email address to join: