- Joined
- Aug 15, 2013
- Messages
- 297
- Reaction score
- 0
Has anyone used these pic bases on their Knights specifically the Ultralight?
http://www.egwguns.com/scope-mounts-rin ... unt-0-moa/
Im asking because I might have a chance to grab up a brand new Ultralight for a pretty good deal. The problem is I normally run a shorter LOP that what is stock on the Ultralights. Normally, like on my Mountaineer, I just had the wood lam stock cut down. With the fiberglass stock I dont want to cut then have to fill. Instead I was going to just set the scope back a bit to adjust.
Factory LOP is 13.5 Im around 12 3/4 so a little bit of scope setback would do the trick.
Ive used the rails on benchrest guns but never on a ML
http://www.egwguns.com/scope-mounts-rin ... unt-0-moa/
Im asking because I might have a chance to grab up a brand new Ultralight for a pretty good deal. The problem is I normally run a shorter LOP that what is stock on the Ultralights. Normally, like on my Mountaineer, I just had the wood lam stock cut down. With the fiberglass stock I dont want to cut then have to fill. Instead I was going to just set the scope back a bit to adjust.
Factory LOP is 13.5 Im around 12 3/4 so a little bit of scope setback would do the trick.
Ive used the rails on benchrest guns but never on a ML