- Joined
- Jul 7, 2005
- Messages
- 590
- Reaction score
- 47
Just figured this out! The SuperDome or the Part# 900043
http://www.knightrifles.com/productdeta ... ?id=900043
Just get the drill bit that just fits inside the nipple mouth. Then drill out the nipple end towards the breech face, about 1 and 1/8 inches, or exactly 3 centimeters.
Do Not Drill Past the Breech Plug un-threaded, smooth shiny, Neck
Then you will have a BH209 ready breech plug, that lignite's every time
8)
When you use NEW Red FPJ, there is no hang fires OR Blowback
Mine works perfectly! And allows me to use the Red Plastic Jackets if I want to!!! 8) 8) 8)
.
http://www.knightrifles.com/productdeta ... ?id=900043
Just get the drill bit that just fits inside the nipple mouth. Then drill out the nipple end towards the breech face, about 1 and 1/8 inches, or exactly 3 centimeters.
Do Not Drill Past the Breech Plug un-threaded, smooth shiny, Neck
Then you will have a BH209 ready breech plug, that lignite's every time
8) When you use NEW Red FPJ, there is no hang fires OR Blowback
Mine works perfectly! And allows me to use the Red Plastic Jackets if I want to!!! 8) 8) 8)
.
