A Ulite barrel will drop right in a Mountaineer stock. Might need a little bedding in front on the lug for the perfect fit. About 1-2" in front of the lug is all. The barrel is a lighter contour than a Mountaineer but otherwise its a drop in replacement.Would that fit on a Knight mountaineer 50 cal stock and what comes with the barrel?
I emailed knight about buying a nitride barrel kit, they told me they are not offering the nitride option barrel kit, I sent another email seeing if they would reconsiderI’d buy one if it was nitrite (sp), oh heck, may buy one anyway.
Well they said sorry we just can’t sell you a nitride barrel kit.they are probably having a hard time getting them doneI emailed knight about buying a nitride barrel kit, they told me they are not offering the nitride option barrel kit, I sent another email seeing if they would reconsider
When I purchased my mountaineer, I had emailed Justin Perry asking about the nitride vs the ceracoat and he assured me that they were just as effective as the other. Don’t know much about the nitride, if it is inside the barrel or not, where as the ceracoat most likely is only on the out side but you could buy the plain stainless barrel and have someone coat it for you.Well they said sorry we just can’t sell you a nitride barrel kit.they are probably having a hard time getting them done
I have a stainless 45, I was just sorry I didn’t get the nitride.I don’t believe you can have a barrel nitrided after the treatment knight does on their barelsWhen I purchased my mountaineer, I had emailed Justin Perry asking about the nitride vs the ceracoat and he assured me that they were just as effective as the other. Don’t know much about the nitride, if it is inside the barrel or not, where as the ceracoat most likely is only on the out side but you could buy the plain stainless barrel and have someone coat it for you.
You want it for the added protection or the black color? I think you can still ceracoat over the dynatec if it’s the color you are wanting.I have a stainless 45, I was just sorry I didn’t get the nitride.I don’t believe you can have a barrel nitrided after the treatment knight does on their barels
BothYou want it for the added protection or the black color? I think you can still ceracoat over the dynatec if it’s the color you are wanting.
nitride is no where close to ceracoat. The nitride process involves putting the part (barrel) in a molten salt bath. Every bit of exposed surface is treated, barrel bore included. No dimensional changes occur.When I purchased my mountaineer, I had emailed Justin Perry asking about the nitride vs the ceracoat and he assured me that they were just as effective as the other. Don’t know much about the nitride, if it is inside the barrel or not, where as the ceracoat most likely is only on the out side but you could buy the plain stainless barrel and have someone coat it for you.
Enter your email address to join: