- Joined
- Jul 6, 2008
- Messages
- 147
- Reaction score
- 0
I had gotten two new Breech Plugs and was very excited, installed with teflon tape and headed out to the range. With every shot I had to pull the primers out with pliers. Finally after about ten shots on one I couldn't get the primer out at the range, it got so buggered up the pliers couldn't get it, I had a backup plug, busted it out and the same thing happened a few shots later.
in all, less than 20 shots fired, Pyrodex and CCI primers
using a drywall screw to extricate it, which is tough because the primer spins though it won't come out
success
I did have the o-ring in both
don't know what the heck i'm doing wrong :evil:
I wanted to put this on GBO forum in the sidekick section but they seem to be down at the moment
in all, less than 20 shots fired, Pyrodex and CCI primers
using a drywall screw to extricate it, which is tough because the primer spins though it won't come out
success
I did have the o-ring in both
don't know what the heck i'm doing wrong :evil:
I wanted to put this on GBO forum in the sidekick section but they seem to be down at the moment