Sizing lubes

[ENCORE50A]

What's everyone using?

I started out with Alox, which was a royal pain. Looking for a better way, I pulled out my RCBS case lube pad. Works perfect and the bullets size much easier.

I have a bowl that after the bullets are sized they go into. Once I'm complete with sizing, 91% alcohol is poured over the bullets and the lube is removed. I use a funnel and pour the remaining alcohol back into its container. This process has proven to work well for me.

 

[HC]

This and clean with denatured alcohol.

 

[MeatMachine]

I use a thin white lithium grease I bought in toothpast type tubes about fifty years ago. A thin smear of it works better than anything else I tried. I’ll wipe them off with a rag with some carb cleaner on it.