- Joined
- Aug 31, 2015
- Messages
- 177
- Reaction score
- 703
Definitely no sabots. I do them with a cut rifled 1-15 twist.What would work best with a .40 caliber barrel? Saboted bullets or full bore?
Definitely no sabots. I do them with a cut rifled 1-15 twist.What would work best with a .40 caliber barrel? Saboted bullets or full bore?
Would that work with my small shank savage 7mm-08 donor?This is my method of headspacing bolt muzzleloaders without using a nut system. You can keep the shank at 1.25" diameter. A fixed length module plug is used which has a short carbide bushing in the rear.
We do this on Paramount conversions and Rem 700/Defiance Outcast and clones. There is a concealed shim ring which we make in a handful of size increments, seen in red. Nominal ring thickness is 1mm (.039) so it gives quite a bit of room in and out. We make .003, .004, .005, .031 and .039 rings which give plenty of flexibility to set head space and time fluting with zero gunsmithing or custom machining required.
What is the barrel thread on that? What is the receiver diameter?Would that work with my small shank savage 7mm-08 donor?
Are you making/selling prefit barrels? I have a Howa 1500 in need of a .40 sml barrel.This is my method of headspacing bolt muzzleloaders without using a nut system. You can keep the shank at 1.25" diameter. A fixed length module plug is used which has a short carbide bushing in the rear.
We do this on Paramount conversions and Rem 700/Defiance Outcast and clones. There is a concealed shim ring which we make in a handful of size increments, seen in red. Nominal ring thickness is 1mm (.039) so it gives quite a bit of room in and out. We make .003, .004, .005, .031 and .039 rings which give plenty of flexibility to set head space and time fluting with zero gunsmithing or custom machining required.
Small shank is 1.055" x 20tpiWhat is the barrel thread on that? What is the receiver diameter?
ThanksDefinitely no sabots. I do them with a cut rifled 1-15 twist.
I’m traveling now. I’ll check the receiver diameter when I get back home next week.What is the barrel thread on that? What is the receiver diameter?
Only prefit for ones listed, Paramount and Rem 700/clones.Are you making/selling prefit barrels? I have a Howa 1500 in need of a .40 sml barrel.
Enter your email address to join: