Base/Ring Height for TC Triumph

[cleboje]

Folks

I don't know which base/ring height works best for a TC Triumph...the options are low, medium and high.

Do I have to remove the rear sight on the barrel?

Which would you use and why is your pick an advantage?

Thanks for all the help.

Joe

 

[Doohan]

Medium should work with 40mm objective and a 3x9 without removing the rear sight.

 

[taylorhaught]

i had to remove the rear sight on my triumph. i used medium rings.

 

[375Matt]

I used a Leupold QR set up with one peice base and medium rings and 40 mm Nikon Omega Scope. I put the Butler Creek caps on and there isn't any clearance of the front with caps on and the front cap hits the rear sight and will not open. Not much room to get your thumb on the hammer either with medium hight. I ordered up some highs to try and may need to have a gun smith move the front sight forward to allow the caps to open.

 

[Doohan]

I had the Omega scope on mine as well with the Talley one pc base..

 

[lefteye]

Leupold base and medium rings on a Triumph and the rear sight had to come off.