Idaholewis
Well-Known Member
- Joined
- Jun 30, 2017
- Messages
- 7,287
- Reaction score
- 10,289
Here is the Bullshop similar bullet that i had Accurate Molds build from an original Bullshop bullet that i sent him, They are REALLY close to the same as the Original. i ran these through my .492 sizer and then Paper patched them, I think they will shoot good? One way to find out! Sabotloader, i would like to send these to you to try, put a good card Wad on top of that T7 powder and fire these things up!!
Here they are after i sized them
And here they are Patched with 2 wraps of 9# onion skin paper, these won't need any sizing, just load and shoot them. You will likely need to Swab between shots, I would for accuracy regardless of how well they load.
And here are 6 of the bullets i had made from the Lee S&W 500 bullet, Try these out as well, see if you can tell any difference between them? These don't need sized either, just load and shoot
Here they are after i sized them
And here they are Patched with 2 wraps of 9# onion skin paper, these won't need any sizing, just load and shoot them. You will likely need to Swab between shots, I would for accuracy regardless of how well they load.
And here are 6 of the bullets i had made from the Lee S&W 500 bullet, Try these out as well, see if you can tell any difference between them? These don't need sized either, just load and shoot