SupplySgt65
Member
- Joined
- Jan 24, 2020
- Messages
- 24
- Reaction score
- 41
Thank you Sideshow!
Youre most welcome !!!!Thank you Sideshow!
Lewis would you use your barrel cleaning method, as described in your video, after performing this procedure to remove any debris/ deburr material?
Yep I definitely do! I started using GOJO Hand Cleaner WITHOUT Pumice, just the Smooth Original One, This stuff Cuts Grease out of a Barrel like NOBODY’S Business The Montana Extreme Bore Polish will Turn BLACK as it Polishes
Here is a Video i did on GOJO Hand Cleaner. A problem we have after shooting Grease Groove Bullets, Some believe its “Flash Rust” And it’s possible in Some Cases, But i can tell you for a FACT that it can also be Bullet Lube, I deal with it Regularly, My Borescope has taught me a LOT about what goes on in my Bores! GOJO Hand Cleaner Cuts the Grease Clean in just a Few Passes, You will then Pull COTTON WHITE Patches
Ya know Lewis i admire a guy that knows what you know hands on . That IS so very impressive . You didnt throw your wallet at it for somebody else to get Their hands dirty then brag . You didnt Merely buy it then proclaim it Best . Youve come up with stuff through thought , dedication , hands on craftmanship , brilliant inovation & imageination and hard work blended with a deep passion that only but a few will ever know . Hats off to you my friend , You da Man . I mean that with the utmost in respect and honor as well . What and How you share it All , merely proves my point..........
Awe inspireing and quite humbleing at the same time . You , ...are a Blessing.....
Hello Lewis. Thanks for the referral. Talked to Al from eagle today 10/27/10. Very helpful, says they can remove the awful camo cerakote and recoat with just about any color or combination of colors and eagle has many to chose from. Looks like they can do a turnaround in about one month. How did your project turn out?I am just about to do something similar, But Different My stuff is going Cerakote, I found a Local Guy here that does it. You could ship that Barrel Back here to Idaho to this Guy. Give me a little bit and I Will have My Stuff Back from him, i will do a Review on it
He does AWESOME Work!! Check out his Gallery
https://eaglegunworksfinishing.com/
I think most satin stainless finishes are soda blasted, but not 100% sureI would only nitride a brand spanking new barrel. BlackIce is external only and very attractive.
Another option is keep it SS but bead blast it to a dull satin finish. Sort of a acid etched look. My GMB 54-120 has this very dull matte SS finish. Not exactly sure how its done. There is even a type of parkerizing that looks like dull SS.
Hello Lewis. Thanks for the referral. Talked to Al from eagle today 10/27/10. Very helpful, says they can remove the awful camo cerakote and recoat with just about any color or combination of colors and eagle has many to chose from. Looks like they can do a turnaround in about one month. How did your project turn out?
I am sending eagle my investarms 45 cal hawken for the “midnight elite” coating. They will remove the green camo cerakote and recoat. I will post results and photos. If all goes well I have other projects in mind.
Enter your email address to join: