Idaholewis
Well-Known Member
- Joined
- Jun 30, 2017
- Messages
- 7,287
- Reaction score
- 10,288
Edmehlig sent me some of his Solid Lyman Gould Bullets to try, He had A Custom Pin made by a very talented 52bore, The pin makes the bullet solid instead of a Hollow point. I shot the exact same target that i shot the Hollow Points with in my other thread, i just used black elictrical tape over the holes. I shot 6 times total. My first ‘Fouler’ shot i put in a HARD packed Sand Bank, i recovered that bullet before leaving. Thank you for the bullets Ed! I can’t wait to get my Mold done the Same as yours, hopefully it shoots the Same! What an AWESOME little Bullet!!
The Solid version shoots just as well as the Hollow Points! This is a true 103 Ranged Yards from my Muzzle, I shot 3 shots, went and checked, they fly right with the Hollow Points cutting the tape i used to tape over the 3 Shot Hollow Point Group
I Came back and shot the last 2 shots, the Group measured 1.400 farthest outside edge to edge, Making the Group .95, Just under 1”
70 Grains of Swiss 3F, .060 Vege Wad on the powder, then a .45 Cal Wool on top of the Vege Wad
The Solid version shoots just as well as the Hollow Points! This is a true 103 Ranged Yards from my Muzzle, I shot 3 shots, went and checked, they fly right with the Hollow Points cutting the tape i used to tape over the 3 Shot Hollow Point Group
I Came back and shot the last 2 shots, the Group measured 1.400 farthest outside edge to edge, Making the Group .95, Just under 1”
70 Grains of Swiss 3F, .060 Vege Wad on the powder, then a .45 Cal Wool on top of the Vege Wad