Knight ultralight?

[Scotts98rt]

Is there a tool to insert the bare 209 primer into the face of the bolt.? I have the bare primer system.

 

[GM54-120]

Yes there is but you can probably make a better tool from a 6mm or 6.5mm box end wrench. Knight has the little plastic one on their website.
https://www.muzzleloaders.com/product/bare-209-primer-capper-decapper/
I cant remember if it was a 6mm or 6.5mm. Which ever one a 209 fits in snug. Then you grind a bit of metal off the outside of the boxed end until it fits in the bare primer bolt face.

 

[Scotts98rt]

I like that idea. Just saw the overpriced capers from knight. They only want 15.00 to ship. I called them said 3-5 days to return a call. I will see if they will send me one since it was missing.

 

[sabotloader]

Is there a tool to insert the bare 209 primer into the face of the bolt.? I have the bare primer system.

I just made one out of a couple of strips of stiff leather. You could make then out of a Teflon/Plastic material.

 

[Scotts98rt]

I was thinking about a fiberstick /plastic. I like the leather idea.

 

[ShawnT]

I drilled a old Oral B tooth brush. Sanded the end a bit for clearance.

 

[Scotts98rt]

 

[Scotts98rt]