- Joined
- Oct 4, 2005
- Messages
- 4,905
- Reaction score
- 477
Hey Guys, I had to make an unexpected run to Ohio and just got back. Yup his is longer and I think Busta was right. They trimmed mine down at bit, actually about .130". I really do believe that the big difference is that they set my custom barrel back a little deeper into the action. I would bet that a new replacement plug would work just fine tin those 2 new .54s.
I did get a response back from Numrich about the odd Knight Plug they listed.
""The plug in question is 1.04" Long, 0.615" Dia on the threads and has about 20 tpi"
My guess is that it really is 18tpi though. This is the only other possibility to match mine. Though I doubt that I would ever need to replace it.
I did get a response back from Numrich about the odd Knight Plug they listed.
""The plug in question is 1.04" Long, 0.615" Dia on the threads and has about 20 tpi"
My guess is that it really is 18tpi though. This is the only other possibility to match mine. Though I doubt that I would ever need to replace it.