I got the idea to try it when 1874Sharpsshooter was out here on his Bear hunt, He was using it. I ran over to BACO Specifically to get a Bottle of it, I pulled Every rifle i owned out of my Safe and Swabbed them Clean of the REM OIL (Pump spray) EVERY Patch came out Cotton white from EACH AND EVERY Rifle as they ALWAYS Do, All i was doing was replacing the REM OIL with this New Montana Extreme Bore Conditioner. After i had ALL barrels Thoroughly Dry and Clean of Rem Oil, I added the Montana Extreme Bore Conditioner to Each and Every one of them. It was about 2 Weeks? Or There Close abouts? 1874Sharpsshooter and i were Visiting over the Phone via Text, he had been on a Gun Cleaning Mission at Home, He told me that he had Found quite a bit of Brown on patches? And was wondering about the GM Barrel he had sent me? He warned me to Check it, I had already cleaned the Barrel THOROUGHLY upon Receiving it, and it did show quite a lot of Brown on the patches. That IMMEDIATELY got my attention to Check my others that i had JUST done with this Bore Conditioner? Sure enough my Blued Barrels showed a Very light Tinge of Brown on The Patches? And it was ONLY My Blued GM Barrels?? Now Remember, When i dried them out of a PROVEN Product (Rem Oil Pump Bottle) there was ABSOLUTELY no sign of Brown, Those patches were COTTON WHITE. My Stainless Barrels showed no signs of Anything, They Pulled COTTON WHITE Patches
After finding what i did with my Blued Barrels, OUT Came ALL of my Guns AGAIN (64 Gun safe Packed to the Rafters) I swabbed the Daylights out of Every Barrel, Added a LIBERAL Amount of Rem Oil BACK IN each Bore, Swabbed back n Forth til i had Each bore back to Cotton White again, and RE Protected with REM OIL.
I thought i had thrown The Montana Extreme Bore Conditioner in the Garbage? But I hadn’t, it’s Stil Sitting here under a Side Table. I will Never use it again, if someone would like it, They are MORE THAN WELCOME to it
In my opinion, this stuff is not worth the Bottle it’s in
EVERY SINGLE Barrel i own looks IDENTICAL to these Borescope Pictures, I could reach in my Gun Safe Blind Folded and Grab one, it won’t matter which one? They ALL LOOK IDENTICAL to this.
I do this to EVERY SINGLE brand new, or Used Barrel i get. I polish them to a Mirror. I actually use Lee Shaver’s Barrel Break in Method, With the Ad of Polishing. My Barrels Stay JUST LIKE this, After they are Clean, Thoroughly Dried, and Oiled good, I can grab one a Year Later and it will pull COTTON WHITE PATCHES. The ONLY Problem i have ever Had was with this Montana Extreme Bore Conditioner, and it was ONLY in my Blued GM Barrels? I am glad i caught it when i did, it was easy to clean up, and Get everything Back to Properly Protected.
It was after this that i did a Bunch of reading, I found where Western Powders does NOT Recommend this Bore Conditioner for Long Term Storage. How handy is that? That is what i bought it for! So what exactly is it Good for??? They Call it “Accuracy Oil” LOL!
YOU BETCHA!! There’s a
SUCKA Born everyday! They got me for 1 Bottle, Good on them
They won’t again