- Joined
- Feb 13, 2020
- Messages
- 1,737
- Reaction score
- 2,232
brand new CVA Optima NM 90 gr OE 3F under a 50x40 Blue Harvester 50x40 sabot /CCI 209 primers . The load I ended up with due to flask of powder was running on empty /26 shots and 19 degrees out (thanks to electric vest/socks/hand warmer ) ! Got home started cleaning and what a mess in the breech /trigger group , kept up with wiping between shots /plug cleaning but noticed after the 1st couple shots primers got dirtier as I shot . Got home and measured primers , a portion went 297-96
also quite a few 98-99and 300 . Made sure the plug was clean and installed a rubber ring (McMaster-Carr # 5462109-01 )
9262K611 oil resist o ring 1 mmw, 4.5mm ID /296 -297 took 2 snaps to close and trigger hammer function work and 298-99
I could have stood a better chance of running the deer down ! Ant thing else to do , never had this much grief wit the CVA/V2 pistol/Ed
also quite a few 98-99and 300 . Made sure the plug was clean and installed a rubber ring (McMaster-Carr # 5462109-01 )
9262K611 oil resist o ring 1 mmw, 4.5mm ID /296 -297 took 2 snaps to close and trigger hammer function work and 298-99
I could have stood a better chance of running the deer down ! Ant thing else to do , never had this much grief wit the CVA/V2 pistol/Ed