- Joined
- Oct 4, 2005
- Messages
- 4,905
- Reaction score
- 477
The Handle can be used on either side, no need to remove it to do it (plunger is only tapped on one side, just flip it over to the other side. The little section just above the bolt has 2 small flats so you can use a little wrench to tighten it. I use it on the right and just use a TDC straight line capper. It has a pretty strong spring so it destroys the caps. I never thought to check but I would bet the spring is the same as the MK, I'll check and see. Joe and Suzi are getting up there in years, Joe is a really nice guy to talk too. I don't recall when they close for the day. They are in Oregon.