Hodgdon Superformance Powder for .35 Whelen

Modern Muzzleloading Forum

Help Support Modern Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
In January bought a CVA Scout in 35 Whelen. Anytime a discussion on the Whelen comes up, I am intently interested. Recently, I had a chance to pick up some Superformance powder, but passed. I had read about some pressure issues because of the duplex powder composition. That was on another forum, so it could have been overblown by the poster.

Anyone else know about potential over pressure issues for reloaders using Superformance?
 
Billyboy, FYI there claims of velocity probably have some optimism in them. As well as their claims for velocity in their performance ammo.

H414 if I remember correctly has a burn rate similar to IMR 4350. But it is more dense so you can fit more in the case. For me the IMR4350 was about the right powder but as stated couldn't fit enough it. But with H414 it was right on the money. At least it worked for me.

But I agree, there should be several powder choices to get the velocity you desire.
I have a CVA Scout in 35 Whelen and I use 4350 but only shooting hard cast GC RFN lead so not worried about high velocity, I'd take it Elk hunting as is no problem, of course I live in a area with alot of elk (before this bad winter anyway) I'll give the load after this 60+ Gust winds die down, probably tomorrow. It's quite a few steps to my reloading bldg. It's cold and I'm old!...Trader
 
I have a CVA Scout in 35 Whelen and I use 4350 but only shooting hard cast GC RFN lead so not worried about high velocity, I'd take it Elk hunting as is no problem, of course I live in a area with alot of elk (before this bad winter anyway) I'll give the load after this 60+ Gust winds die down, probably tomorrow. It's quite a few steps to my reloading bldg. It's cold and I'm old!...Trader
I have a number of cast bullet choices myself. I never considered using them for elk and here is why. Im in Michigan and get the opportunity to hunt elk only every 5-6 years. Im 67 so my elk hunting days are over. They were DIY hunts. Plopped in the middle of the National Forest in Colorado and do our best. (scored 2 for 6 trips) I always wanted the most powerful cartridge that would give me distance. I needed every little bit of edge I could get. Thats why I loaded the 250 grain Speers, Noslers, Barnes, to the best and safest velocity I could get. I also used a 338 Winchester Mag.

But I have no doubt a heavy piece of lead will kill an elk with no problem. If you need some lead I would be willing to sell you some real cheap.
By the way. 1st elk 5x5 at 375 yards with 338, second 6x6 at 50 yards with 35 Whelen. I also have some 300 grain Barnes originals if anyone needs some.
 
I have a number of cast bullet choices myself. I never considered using them for elk and here is why. Im in Michigan and get the opportunity to hunt elk only every 5-6 years. Im 67 so my elk hunting days are over. They were DIY hunts. Plopped in the middle of the National Forest in Colorado and do our best. (scored 2 for 6 trips) I always wanted the most powerful cartridge that would give me distance. I needed every little bit of edge I could get. Thats why I loaded the 250 grain Speers, Noslers, Barnes, to the best and safest velocity I could get. I also used a 338 Winchester Mag.

But I have no doubt a heavy piece of lead will kill an elk with no problem. If you need some lead I would be willing to sell you some real cheap.
By the way. 1st elk 5x5 at 375 yards with 338, second 6x6 at 50 yards with 35 Whelen. I also have some 300 grain Barnes originals if anyone needs some.
Wind died down to 7 MPH this morning so made it out to my shed. I'm shooting 55 gr 4350 with a hard cast GC RNFT 215 gr projectile, gives a little shove to this 77 YR old shoulder but don't use it for P dogs or gophers. My hunting and trapping days will be over when the LORD calls me home. Trader
 
I use IMR 4064, no issues. Got several pounds at an estate sale, another reason, cheap . Cheap that works is alway's a +. The 35 Whelen is a hammer cartridge.

JW
 
Cartridge:
35 Whelen
Load Type:
Rifle
Starting Loads

Maximum Loads

Bullet Weight (Gr.)​
Order BW​
Powder​
Bullet Diam.​
C.O.L.​
Grs.​
Vel. (ft/s)​
Pressure​
Grs.​
Vel. (ft/s)​
Pressure​

200 GR. SIE RN​
200​
H380​
.358"​
3.050"​
59.0​
2511​
41,500 CUP​
61.0​
2602​
45,000 CUP​
200 GR. SIE RN​
200​
Varget​
.358"​
3.050"​
52.0​
2508​
40,400 CUP​
57.0​
2653​
42,300 CUP​
200 GR. SIE RN​
200​
BL-C(2)​
.358"​
3.050"​
60.0​
2636​
43,000 CUP​
63.0​
2807​
49,000 CUP​
200 GR. SIE RN​
200​
H335​
.358"​
3.050"​
52.0​
2588​
44,900 CUP​
55.0​
2684​
50,000 CUP​
200 GR. SIE RN​
200​
H4895​
.358"​
3.050"​
54.0​
2544​
43,500 CUP​
57.0​
2689​
49,000 CUP​
200 GR. SIE RN​
200​
H322​
.358"​
3.050"​
52.0​
2540​
42,600 CUP​
56.0​
2691​
48,500 CUP​
200 GR. SIE RN​
200​
IMR 4320​
.358"​
3.050"​
53.0​
2436​
41,400 CUP​
59.0C​
2669​
49,300 CUP​
200 GR. SIE RN​
200​
IMR 4064​
.358"​
3.050"​
54.0​
2460​
40,800 CUP​
59.0C​
2637​
46,400 CUP​
200 GR. SIE RN​
200​
IMR 4895​
.358"​
3.050"​
54.0​
2512​
42,800 CUP​
59.0C​
2696​
48,800 CUP​
200 GR. SIE RN​
200​
IMR 8208 XBR​
.358"​
3.050"​
53.0​
2579​
41,300 CUP​
59.0C​
2802​
48,900 CUP​
200 GR. SIE RN​
200​
IMR 3031​
.358"​
3.050"​
50.0​
2467​
40,900 CUP​
55.5​
2711​
48,900 CUP​
200 GR. SIE RN​
200​
SR 4759​
.358"​
3.050"​
34.5​
2265​
51,400 CUP​


Jason Waller

Customer Service Technician

Hodgdon Powder Company

6430 Vista Drive

Shawnee, Kansas 66218

[email protected]

913-745-0846

Here are the Fairly anemic Loads Hodgdon sent. After looking through my Old Lyman # 47 Manual it Lists
Max Load of 65.3 Grs of H335 with 200 Gr Bullets @ 2,937 fps 😮
Hodgdon shows a Max Load of 55.0 Grs of H335 with 200 Gr Bullets @ 2,684 fps 😞
 

Latest posts

Back
Top